User’s Manual
2
1.1
Introduction
ALAD-A1201T is an intelligent, fanless embedded panel system powered by Intel® Braswell N3000 family
high performance processor with multiple I/O interface, 2.5 inch SATA HDD driver bay for storage and 12.1
inch LCD with touch green for display. ALAD-A1201T offers 1*HDMI interface, 2*Giga Lan ports,
4*USB3.0 ports, 1*USB2.0 ports, 2*COM ports, 1*Mini PCIe socket is PCIex1 and USB signal and jumper
to be mSATA; ALAD-A1201T supports 12.1 inch 1024*768@60Hz TFT LCD,with 5-wire resistive or
projected capacitive touch, 1*2.5 inch SATA HDD driver bay, 1*mSATA for storage ,DC 12~24V power
input.
1.2
Features
1
、
Aluminum Die-Casting Chassis , Fanless design;
2
、
12.1'LED TFT LCD, Capacitive/ Resistive Touch
；
3
、
Intel Braswell N3000 Family CPU;
4
、
1*DDR3L 1600 SODIMM,Max 8GB;
5
、
1*Mini PCIe(PCIe+USB,or mSATA);
6
、
2*COM,2*LAN,4*USB3.0,1*USB2.0
；
7
、
1*2.5' HDD Bay,1*mSATA;
8
、
DC 12~24V Power Input
；
9
、
Front ATX Power SW & Rear Power SW Signal Connector;
10
、
Flat Bezel design, IP65 Front Panel;
11
、
Easy to Assemble and Disassemble HDD Cover
。
1.3
Specifications
1.3.1
General
CPU:
Intel Braswell N3000 Family( N3160 1.6- 2. 24GHz, 4 cores and 4 threads, TDP 6W)
BIOS:
SPI 64M bit Flash ROM
System Memory:
1*DDR3L 1600 SODIMM,Max 8GB
Watchdog Timer:
255-level interval timer, setup by software
Serial Ports:
2* RS232/422/485, D-sub 9 male in rear
USB:
1* USB2.0 Type A Ports in front, 4* USB 3.0 Type A Port in rear
Expansion Interface:
1* Mini PCIe with PCIeX1\USB2.0 and SATA signal, Support wifi and 3G etc. ,jumper to
be mSATA
Storage:
Optional 1* mSATA
Support 1* 2.5inch SATA HDD or SSD, SATA3.0 6Gbps
1.3.2
Display and Touch
Chipset:
Intel HD Graphics 400
Display Memory:
Shared system memory
HDMI Resolution:
U
p to 3840*2160 @30Hz
Summary of Contents for ALAD-A1201T
