Page | 8
3. Check the water supply to be sure there is no leakage.
4. Debug the water level in the water tank.
5. Check if the power supply connection is correct.
6. Check if the assembling and connection of the power control are correct.
7. Check if there is litter in the water tank.
8. Check if there is foreign matter in the air compressor.
9. Check if the power supply and the voltage are normal.
10. Check if the running electrical current is in the rated range.
11. Check if there is any shake when running the cooler.
11.
GUIDE FOR OPERATION
Introduction of the LCD controller
Introduction of the function of the button on the remote controller
1.
ON/OFF: Start the cooler in stand-by state or stop.
2.
SPEED: Change the airflow for the conversion from low speed, mid speed
and high speed, the rank is 1-2-3-1.
Summary of Contents for JH168
Page 1: ......