Page | 6
4. A globe-valve is needed near the intake hose, and an extra hose connector is
needed for cleaning.
5. Over-current and leakage protection switch should be added on the feed
circuit, to protect the cooler, the wire net, and the safety of people.
6.
GUIDE FOR INSTALLATION AND UNINSTALL OF TRUCKLES
AND HORSE
1. Take two sets of assembled frames as Pic 1
2. Use ST5×25 bolts to stable the assembled frame to the bottom of the water
tank. And lock the bolt closely with Phillips screwdriver. Please pay attention to
the hole at the tank while installation, as Pic 2.
7.
GUIDE FOR INSTALLATION AND UNINSTALL OF SIDE PANEL
1. Loose 8 bolts with cross screwdriver, as Pic 3.
2. Pull up 2 pieces of dust screens and the side panel, then pull out the side
panel and take it out, as Pic 4.
3. Please install as the contrary step as above.
Summary of Contents for JH168
Page 1: ......