SX8 User Manual
G-‐UM-‐00004 Rev 006
41 of 45
6
SAFETY
To avoid the risk of injury or death, always observe the following
precautions.
The safety instructions must be observed whenever the unit is
operated, serviced, or repaired. Failure to comply with any of these
instructions or with any precaution or warning contained in the user’s
manual is in direct violation of the standards of design, manufacture,
and intended use of the unit. JGR Optics assumes no liability for the
customer’s failure to comply with any of these safety requirements.
Safety Symbols
The following symbols and messages can be marked on the unit (see
Table 10). Observe all safety instructions that are associated with a
symbol.
Table 10: Safety Symbols
Symbol
Description
Frame or chassis terminal for electrical grounding
within the unit.
Protective conductor terminal for electrical grounding
to the earth.
WARNING
The procedure can result in serious injury or loss of life
if not carried out in proper compliance with all safety
instructions. Ensure that all conditions necessary for
safe handling and operation are met before
proceeding.
CAUTION
The procedure can result in serious damage to or
destruction of the unit if not carried out in compliance
with all instructions for proper use. Ensure that all
conditions necessary for safe handling and operation
are met before proceeding.
