RL1 User Manual
17
M-RL1-001-01
Figure 11: Sample trace showing RL and RL
TOTAL
Connecting an SX1 Switch
The RL1 can be used with a switch for multifiber or high throughput applications.
1.
Connect the SX1 (USB B port) to the RL1 (USB A port).
2.
On the RL1
Setup
page, confirm the SX1 connectivity and, if the RL1 is a dual output, the switch
assignment (see Figure 12).
Figure 12: RL1 with SX1
–
Setup
page
3.
Swipe right to the
Measure
page (see Figure 13). Press and hold in the top left corner to open the
Switch Selection
pop-out. From this pop-out, you can:
a.
Activate or bypass the SX1 switch
b.
Skip to the desired channel
