JGaurora A7, User Manual

Page: 3 / 21

FORERUNNER OF DESKTOP 3D PRINTER
2
1. Safety Attention
【
To ensure safety, to avoid any damage or injury, please follow
the instructions below
】
During machine running, nozzle part can reach to 280
℃
, platform
can reach 110
℃
, for your safety is forbidden to touch nozzle,
platform or printing model during cooling or printing.
During machine running, don not put hands in it
。
Working voltage is 50HZ alternating current and 110~220V voltage,
tripod socket must be on GND, shall not use other power supplies,
to avoid damage or fire and electric shock accidents.
During printing might generate some smell, it would not cause any
side effect, suggest print under good ventilation condition
。
Don’t modify the machine to avoid any damage or injury, except
maintainer do that.
Avoid bending electric wire, near high temp., tire with thing or hold
heavy stuff.
Don’t use broken or moisture plug , to avoid cause shortcut or
injury.
Don’t let children to operate it. Put machine to some where children
can not reach.
Don’t put machine any where with high temp., moisture or fire.
During printing, don’t move or shake it.
｛
forbidden
｝
｛
warning
｝
z
z