JGaurora A7, User Manual

Page: 17 / 21

FORERUNNER OF DESKTOP 3D PRINTER
16
5-3 Connect power cable with printer, and power on, machine will in
standby state.
5-4 Press ”LEVELING” on the display, extruder will move as the
directions of A-B-C-D as pictures shown to level the platform.
5-5 PREHEAT and upload filament
Press “PREHEAT” on screen
，
then choice“PLA”, nozzle and platform will heat to
setting temp.(this instruction is for PLA, if ABS you can choice ABS)
；
Press “lifting tray” on control panel, filament rack will raise up, press one more, it will
go down, up load filament as below.