JFE Advantech ARO-FT, User Manual

Page: 13 / 50

11
5.2.2 Cable type (ARO-FT)
(1) How to attach

Make sure that the O-rings are free of dust.

Insert slowly so as not to warp or pinch the O-rings.

Before use, check if the connector is inserted up to its base. Incomplete insertion can
cause damage to the instrument due to the seepage of water.
(2) How to detach
It can be pulled out by loosening the locking sleeve.
Before attaching again, apply adequate amount of grease on the O-rings.

When detaching, hold the metal part and pull it out. Pulling only the cable can break it.
Insert the connector into the main unit until two black
O-rings are completely hidden. Hold it in while going to
the next step.
Tighten the locking sleeve up to its base while pushing the
connector against the main unit (see below).
Check if the screw thread is completely hidden .
Thread is completely hidden. Thread is visible.
OK NG