SwingControl Unit
CHANGING NETWORK SETTINGS AND MODBUS PORT
From SwingControl configuration tool it is possible to
change the device to either use DHCP addressing or static
IP address.
1. Point your web browser to SwingControl's current IP
address, by deafult:
http://192.168.0.123
2. Using configuration tool requires you to input the
following user name and password: ”admin”, ”J3V3NSC”
3. Provided the user name and password are correct,
configuration panel should open in your browser.
4. You can choose either DHCP or static IP address. If you
choose static IP address, you must also provide valid IP
address, gateway and netmask that match your network.
5. In modbus settings it is possible to configure
SwingControl to use another port than the default 4433.
6. Finally changes are applied by selecting
”SAVE/REBOOT”. This saves your changes to
SwingControl persisten memory and causes a reboot to
the device. After reboot, new settings are applied.
PAGE
9
JEVEN Kitchen ventilation
WWW.JEVEN.COM
All rights reserved