SwingControl Unit
3. Choose ”Properties”
4. In ”Local area connection properties” choose
”Internet Protocol Version 4(TCP/IPv4)” from the list
and then choose ”Properties”.
5. Select ”Use the following IP address” and input IP
address, subnet mask and default gateway to match the
settings of SwingControl.
NOTE!
If you are connecting to SwingControl device that has
default factory settings, you can use the values shown
in screenshots. After saving the settings in your
computer, provided that network cabling is done
correctly, you should be able to open SwingControl
configuration panel by pointing you web browser to
address ”http://192.168.0.123”
PAGE
8
JEVEN Kitchen ventilation
WWW.JEVEN.COM
All rights reserved