Jeulin 453 146, Manual

Page: 12 / 15

Measurement
Ventilation Initio
®
2
Ref : 453 146
ENGLISH 11
2.5.4 Transferring the data to the computer
Once the acquisition is complete, it is possible to transfer the data to a computer to process
it:
- Install the Initio ® 2 software available at www.jeulin.fr/Initio2
- Connect the Initio
®
2 to the computer via the USB-
𝜇
USB cable
- Launch the Initio ® 2 software
- Load the saved acquisition by clicking on the icon:
The data then appears on the screen. Right-clicking the chart provides access to various
graphic tools.
3.
Data visualisation
It is possible to view the data at any moment in tabular or chart format. To do so, simply
press the Back button (2). The display then toggles between table and chart measurements.
Regardless of the current display, data acquisition can be monitored.
After 5 seconds without activity, the table or chart is displayed in full screen. To again obtain
the associated functions, turn the knurled knob.
In the table, the arrows situated at the bottom right are used to move between the rows of
the table.
4.
Analogue outputs
Initio
®
2 is equipped with banana jack and 3.5 mm jack analogue outputs.
4.1 Banana jacks
- Connect the Initio
®
2 to an ExAO interface equipped with direct inputs using banana
leads
- Configure the direct entry according to the correspondence table above.
Correspondence table:
Measurement Calibre Value Voltage
Volume 10L 0L -5V
10L +5V
Volume 100L 0L -5V
100L +5V
Flow rate 5 L/s 0 L/s -5V
5 L/s +5V
Flow rate 10 L/s 0 L/s -5V
10 L/s +5V
Respiratory rate 60cpm 0cpm -5V
60cpm +5V