background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

USER’S NOTICE 

COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER.  NO PART OF THIS 
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE 
REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR 
BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. 

THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE V266B MOTHER-BOARD 
AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, 
CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” 
WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, 
INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, 
LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).  

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL  MAY OR MAY NOT BE 
REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND 
THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S 
BENEFIT, WITHOUT INTENT TO INFRINGE. 

 

Manual Revision Information 

Reversion   

Revision History    

Date 

4.0 

 

 

Fourth Edition  

   

January 2002 

Item Checklist 

5

 

V266B Motherboard 

5

 

Cable for IDE/Floppy 

5

 

CD for motherboard utilities 

 

Cable for USB Port 3/4 (Option) 

5

 

V266B User’s Manual 

AMD Athlon™ / Duron™ Processor Family 

Cooling Solutions 

As processor technology pushes to faster speeds and higher performance, thermal management 
becomes increasingly crucial when building computer systems. Maintaining the proper thermal 
environment is key to reliable, long-term system operation. The overall goal in providing the proper 
thermal environment is keeping the processor below its specified maximum case temperature. 
Heatsinks induce improved processor heat dissipation through increased surface area and 
concentrated airflow from attached fans. In addition, interface materials allow effective transfers of 
heat from the processor to the heatsink. For optimum heat transfer, AMD recommends the use of 
thermal grease and mounting clips to attach the heatsink to the processor.  
When selecting a thermal solution for your system, please refer to the website below for collection of 
heatsinks evaluated and recommended by AMD for use with AMD processors. Note, those heatsinks 
are recommended for maintaining the specified Maximum T case requirement. In addition, this 
collection is not intended to be a comprehensive listing of all heatsinks that support AMD processors.  
 
For vendor list of heatsink and fan, please visit

http://www1.amd.com/products/duron/thermals 

http://www1.amd.com/products/athlon/thermals 

Chapter 1 

Summary of Contents for V266BR4A

















































Reviews: