34
3-11 Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Miscellaneous Control
Item Help
CPU Clock Ratio 8
Auto Detect PCI/DIMM Clock Enabled
Spread Spectrum Disabled
** Current Host Clock
Host Clock at Next Boot 100
** Current DRAM Clock
DRAM Clock at next Boot MHz(By SPD)
VDD Select 1.6V(Default)
AGPVDD Select 1.6V(Default)
VDIMM Select 2.6V(Default)
Flash Part Write Protect Enabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect DIMM/PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz
∼
132MHz, 133MHz
∼
200MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz or 133MHz (only select CPU Frequency 100MHz.)
AGPVDD Select
This item allows you to select 1.5V of the AGP 4X VGA card. The choice are: 1.5V, 1.6V.
VDIMM Select
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V,
2.8V.
