35
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled.
Current CPU Temperature/Current System Temperature/Current FAN1, FAN2 Speed/
Vcore/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11
Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Miscellaneous Control
Item Help
CPU Clock Ratio 8X
Auto Detect DIMM/PCI Clock Enabled
Spread Spectrum Disabled
** Current Host Clock is 100/33MHz **
Host/PCI Clock at Next Boot
100/33MHz
** Current DRAM Clock is 133MHz **
DRAM Clock at next Boot
133MHz(By SPD)
VAGP Output 1.6V(Default)
VRAM Output 2.65V(Default)
Chipset 2.5V 2.50V(Default)
VAGP LUV Protect Enabled
VRAM LUV Protect Enabled
Dual3.3V LUV Protect Disabled
Menu Level >
↑↓
(( Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect PCI/DIMM Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz(132MHz, 133MHz(165MHz, 166MHz(255MHz.
