20
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<
–
> to select Manual, None, Auto type. Note that the specifications
of your drive must match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If your hard disk drive type is not matched or
listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be “None”.
If the controller of HDD interface is CD-ROM, the selection shall be “None”
Access Mode
The settings are Auto Normal, Large, and LBA.
Cylinder
number of cylinders
Head
number of heads
Precomp
write
precomp
Landing Zone
landing
zone
Sector
number of sectors
3-5 Advanced BIOS Features
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Advanced BIOS Features
Item Help
Anti-Virus Protection Disabled
CPU L1 & L2 Cache
Enabled
CPU L3 Cache Enabled
CPU L2 Cache ECC Checking
Disabled
Limit CPUID MaxVal Disabled
Hyper-Threading Technology Enabled
Quick Power On Self Test Enabled
First Boot Device Floppy
Second Boot Device HDD-0
Third Boot Device CDROM
Boot other Device Enabled
Swap Floppy Drive Disabled
Boot Up Floppy Seek Enabled
Boot Up NumLock Status
On
Typematic Rate Setting
Disabled
x Typematic Rate (Chars/Sec)
6
x Typematic Delay (Msec)
250
Security Option Setup
APIC Mode Enabled
MPS Version Control For OS
1.4
OS Select for DRAM > 64MB
Non-OS2
HDD S.M.A.R.T. Capability
Disabled
Report No FDD For Windows
Yes
Video BIOS Shadow Enabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults