32
The optional settings are: [Enabled]; [Disabled].
When set as
[Enabled]
, the following items shall appear:
SATA Mode Selection
The default setting is: [AHCI].
The optional settings are: [AHCI]; [RAID].
SATA
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable each SATA port.
Hot Plug
The optional settings: [Disabled]; [Enabled].
M.2
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable device connected to M.2 SATA slot.
PCH-FW Configuration
Press [Enter] to view ME information and make settings in the following sub-items:
TPM Device Selection
Use this item to select TPM device: PTT or dTPM.
The optional settings: [dTPM]; [PTT].
Warnning!
PTT/dTPM will be disabled and all data saved on it will be lost.
Firmware Update Configuration
Press [Enter] to make settings for ‘
ME FW Image RE-Flash
’.
ME FW Image Re-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
*
Note
:
In the case that user needs to update ME firmware, user should set
‘ME
FW Image Re-Flash
’ as [
Enabled
], save the settings and exit. The system will
turn off and reboot after 4 seconds. If the user goes to BIOS screen again will find
