31
3-11 Clock/Voltage Control
This section is for setting CPU Frequency/Voltage Control.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
** Current CPU Clock is 200MHz **
CPU Clock at Next Boot is 200
** Current AGP Clock is 66MHz **
AGP Clock at Next Boot is 66
Men Clock at Next Boot is Auto
VDIMM/VDDQ Over Voltage Enabled
VDIMM Select 2.65V(Default)
VDDQ Select 1.55V(Default)
Vcore Over Voltage Disabled
Hammer FID Select Default
Hammer Vcore Select Default
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU Clock at next Boot is
This item allows you to select CPU frequency step by step increasing.
The choice are: 200MHz
∼
300MHz.
Mem Clock at next Boot is
This field displays the capability of the memory modules that you can use
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V,
2.8V.
VAGP Output
This item allows you to select 1.5V of the AGP 4X/8X VGA card. The choice are: 1.5V, 1.6V,
1.7V, 1.8V.
VCC2.5V Voltage Select
This item allows you to select 2.5V of the VCC2.5V Voltage. The choice are: 2.5V, 2.6V.
