9
© 2002/2003 MagicTwin All rights reserved. Version dated 11/2003.
barebone system is equipped with NVIDIA nForce2 integrated graphic chipset.
You can now proceed along the hardware installation according to the steps described below.
Installation
Please check first the available VGA port on motherboard or barebone system and follow the
steps described below for installation.
Switch off your PC and open the computer case.
Remove the AGP slot bracket and insert the dual headed AGP VGA card purchased
separately from dealer into the AGP slot.
Dual Port AGP VGA Card
Attach the delivered Y-cable; one to the “green” port (the PS/2 mouse port), and the other
to the “violet” port (the PS/2 keyboard port) at the rear side of you motherboard or
barebone system.
Connect the 1
st
and 2
nd
mouse to the two green female PS/2 heads of the Y-cable linked to
the PS/2 mouse port, and the 1
st
and 2
nd
keyboard to the violet PS/2 heads on the other Y-
cable attached to the keyboard port. You have to connect two monitors to the two VGA
ports on your system. The additional monitor MUST be attached otherwise Windows XP
will not detect and enable the 2
nd
monitor.
Now restart the PC.
MagicTwin Software Installation
