JETWAY JDL108G-4F-M, User Manual

Page: 4 / 37

-2-
‘
1-3-2
Phoenix terminal definition:
1---
：
Grounding
2---REALY: Alarm contacts for the loss of power
3----V2+
：
DC Power Input the positive electrode
4----V2-
：
DC Power input negative electrode
5----V1+
：
DC Power Input the positive electrode
6----V1-
：
DC Power input negative electrode
Note:
1.Power failure alarm contact definition: power outages, the contact is closed, the
power contacts are disconnected.
Contact load: 2A 30DC or 0.5A 125VAC
2. reversed after the device does not work.
1.3.2 Indicator Description
On the front panel indicators are used for monitoring the running state of equipment,
the table follow is the indicator status and description for common fault:
LED
Indicator
Color
Status Description
PWR
Green
(Yellow)
Lights After the switch connected to the power, DC power supply
input for the V+, V-contacts
Extinguish Check if the AC power connector is loose, or power cord
is intact
Link/Act Yellow
Lights
The switch network device interface is properly
connected to a port, the corresponding indicator lights
Flashing Port if the data stream, the corresponding port Flashing
Extinguish Check if the connection of the network cable is intact, or
the joint is loose
POE Green
Lights When there is compliance IEEE802.3af & at the PD
device access time
Extinguish Non-PD devices or non-compliant equipment