background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

21                 

3-6  Advanced Chipset Features 

The Advanced Chipset Features Setup option is used to change the values of the chipset 
registers.  These registers control most of the system options in the computer. 

Phoenix – AwardBIOS CMOS Setup Utility  

Advanced Chipset Features 

 

Item Help 

 

  DRAM Timing Setting           Press Enter 

  AGP Timing Setting            Press Enter 

  PCI Timing Setting            Press Enter 

  Memory Hole                   Disabled 

  System BIOS Cacheable         Disabled 

  Video RAM Cacheable           Enabled 

   

 
  Menu Level > 

↑↓→←

 Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values  F6:Optimized Defaults  F7:Standard Defaults 

Note:  Change these settings only if you are familiar with the chipset. 

DRAM Timing Setting 

Please refer to section 3-6-1 

AGP Timing Setting 

Please refer to section 3-6-2 

PCI Timing Setting 

Please refer to section 3-6-3 

System BIOS Cacheable 

Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in 
better system performance.  However, if any program writes to this memory area, a system 
error may result.  The settings are: Enabled and Disabled. 

Video BIOS Cacheable 

Select Enabled allows caching of the video BIOS, resulting in better system performance.  
However, if any program writes to this memory area, a system error may result. The settings 
are: Enabled and Disabled. 
 
 
 
 
 
 
 
 

 
 

Summary of Contents for J7F4-F











































Reviews: