Soft-Off by PWR-BTTN:
When Enabled, turning the system off with the on/off button places
the system in a very low-power-usage state, with only enough circuitry receiving power to
detect power button activity or Resume by Ring activity.
The Choice: Instant-Off, Delay 4 Sec.
Resume by Ring:
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state..
The Choice: Enabled, Disabled.
IRQ 8 Break Suspend:
You can Enable or Disable monitoring of IRQ8 so it does not
awaken the system from Suspend mode.
The Choice: Enabled, Disabled.
Reload Global Timer Events:
When Enabled, an event occurring on each device listed below restarts the global time for
Standby mode.
IRQ[3 -7, 9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
3-5 PnP/PCI CONFIGURATION SETUP
This section describes configuring the PCI bus system. PCI, or
P
ersonal
C
omputer
I
nterconnect,
is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to the default settings.
ROM PCI/ISA BIOS (2A6LGJ1F)
21
Summary of Contents for BX2000
Page 5: ...2 2 BX2100 BX2000 Mainboard Diagram Figure 2 2 Only for BX2100 mainboard 4...
Page 37: ...The un selected area will be gray out 36...
Page 38: ...The un selected area will be gray out 37...
Page 40: ...BX2100 SPDIF IN An example of Portable CD Player Output to BX2100 Optical Input Setup 39...