background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

Chapter 1 

Introduction of 

845GVFD Motherboard

 

1-1  Feature of motherboard 

The 845GVFD motherboard is design for use Intel Pentium 4 Processor in 478 Pin 
Package/Northwood Processor with the Intel 845GV Chipset delivers a high performance and 
professional desktop platform solution. Which utilize the Socket 478 design (Support Hyper 
Threading CPU) and the memory size expandable to 2.0GB. 

The 845GVFD motherboard use the newest Intel 845GV Chipset Supports 533MHz System 
Bus in data transfer rate, and provided 133MHz SDRAM clock frequency support DDR266 
SDRAM.  The motherboard offer ULTRA ATA 

100 

to provide speedier HDD throughout that 

boosts overall system performance. 

845GVFD with integrated 2D/3D Graphics Accelerator which supports 256 bit graphics core, 
and supports hardware motion compensation assist for software MPEG/DVD decode, makes 
this board lower cost alternative to a video card.  

The 845GVFD motherboard including PCI LAN Controller chip support 10/100 Mb/sec Base 
transfer rate.  

The motherboard also has an integrated AC97’ 6-channel Codec on board support 6-channel 
3D surround positioning Audio which is fully compatible with Sound Blaster Pro

 that gives 

you the best sound quality and compatibility. The motherboard provided SPDIF-In/ SPDIF-
Out optical function support SPDIF device.    

With USB control as well as capability of expanding to 6 USB2.0 function ports, the 
motherboard meet future USB demand also the motherboard have built-in hardware monitor 
function. This will monitor and protect your computer. The motherboard special design in 
hardware to protect BIOS from virus crash BIOS data.  

The motherboard provide special function in BIOS Setup to setting CPU Host clock step by 
step increasing let users to approach over clocking. This motherboard provided over current 
and over voltage protect function for protection AGP Card and DRAM module, when the over 
current or over voltage occurs it will shut down the power immediately to protect motherboard. 
Users must turn off the AC power few seconds before turn on system.  

The motherboard provided high performance & meet future specification demand.  It is really 
wise choice for your computer. 
 
 
 
 
 
 
 

Summary of Contents for 845GVFD















































Reviews: