background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

35 

Chapter 4 

DRIVER & FREE PROGRAM INSTALLATION 

Check your package and there is A MAGIC INSTALL CD included. This CD consists of all 
DRIVERS you need and some free application programs and utility programs. In addition, this 
CD also include an auto detect software which can tell you which hardware is installed, and 
which DRIVERS needed so that your system can function properly. We call this auto detect 
software MAGIC INSTALL. 

MAGIC INSTALL Supports WINDOWS 98SE/ME/NT4.0/2000/XP 

Insert CD into your CD-ROM drive and the MAGIC INSTALL Menu should appear as below. 
If the menu does not appear, double-click MY COMPUTER / double-click CD-ROM drive or 
click START / click RUN / type X:\SETUP.EXE (assuming X is your CD-ROM drive). 

 

From MAGIC INSTALL MENU you may make 11 selections: 

1.

 

INF 

install Intel 845 chipset system driver 

2.

 

VGA 

install Intel 845G VGA driver 

3.

 

SOUND 

install ALC Audio Codec driver 

4.

 

LAN 

install VIA VT6105 PCI 10/100MB Fast Ethernet driver 

 

(for 845GLMP/845GVMP)

 

5.

 

USB2.0 

install USB 2.0 driver 

6.

 

PC-CILLIN 

install PC-CILLIN2004 anti-virus program 

7.

 

PC-HEALTH 

install Intel 845 PC-HEALTH monitor 

8.

 

MBIOS&DX9 

install BIOS Live Update Utility and Microsoft DirectX 9 driver 

9.

 

IAA 

install Intel Application Accelerator software  

10.

 

BROWSE CD 

to browse the contents of the CD 

11.

 

EXIT 

to exit from MAGIC INSTALL menu 

 

Summary of Contents for 845GLM
















































Reviews: