13
upward to a 90-degree angle. Insert the CPU with the correct orientation as shown
below. The notched corner should point toward the end of the level. Because the
CPU has a corner pin for two of the four corners, the CPU will only fit in the
orientation as shown.
CPU ZIF Socket 370
Colden Arrow
So
ck
et
37
0
Intel
Pentium
III
When you put the CPU into the ZIF socket. No force require to insert of the CPU,
then press the level to Locate position slightly without any extra force.
2-3-4 Over clock Running
WARNING! This section is for experienced motherboard installer only. Over
clocking can result in system instability or even shortening life of
the processor.
After setting the Jumper
JP7
you can choose over clock running by BIOS CMOS
SETUP UTILITY. When you entered CMOS SETUP UTILITY, choose
“
Frequency/
Voltage control
”
you will see the screen as below then.
1. You can choose the situation you want to try.
JP7 JP4
JP5
CPU/SDRAM (MHz)
1-2 3-4 5-6 7-8
AUTO
OFF OFF OFF OFF ON ON
66/66
OFF OFF OFF ON OFF OFF
66/100
OFF OFF OFF OFF OFF OFF
100/100
ON OFF OFF OFF OFF OFF
100/133
ON OFF ON OFF OFF OFF
133/100
ON ON OFF OFF OFF OFF
133/133
ON ON ON OFF OFF OFF
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Frequency/Voltage Control
Cyrix III Clock Ratio
Default
Item Help