13
Item Help
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
CPU/SDRAM Clock Default
CPU Clock Ratio X 3
Menu Level >
↑↓→←
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
NOTE!
Our engineer has over clock running and tested for a few hours. Again we don’t
suggest user running over clock.
2-4 Install Memory
This motherboard provides
two
168-pin DUAL INLINE MEMORY MODULES (DIMM)
sites for memory expansion available from minimum memory size over 32MB to maximum
memory size of 512MB SDRAM.
Valid Memory Configurations
Total Memory
DIMM1 DIMM2
System Accept or
Not
Min.
∼
Max.
DS/SS
Accept 32MB
∼
256MB
DS/SS Accept 32MB
∼
256MB
DS/SS DS/SS
Accept
32MB
∼
512MB
DS : Double Sided DIMM SS : Single Sided DIMM
NOTE!
Make sure the total installed memory does not exceeds 512MB, otherwise the
system may hang during startup.
Generally, installing SDRAM modules to your motherboard is very easy, you can refer to
figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks like.
CPU/SDRAM Clock
Default [ ]
133/100 Mhz..... [ ]
138/103 Mhz..... [ ]
140/105 Mhz..... [ ]
150/120 Mhz..... [ ]
↑↓
:Move ENTER:Accept ESC:Abort
