10
TYPHOON HOT G2 MANUAL - WATER JETTER/DRAIN CLEANER
The manufacture reserves the right to modify design features and technical facts without notice: due to our principals of continuous improvement.
Applications
Pipe Size
Suggested Hose (ID)
Kitchen sinks, laundry tubs and stacks, clean-outs, and vents.
2” – 3”
1/8” Whip hose (optional equipment)
Shower and floor drains, lateral lines, and grease traps.
3” – 4”
1/8” or 3/16” Whip hose (optional
equipment) or 1/4” Remote Reel
Sewer and storm water lines
4” – 6”
1/4” Remote Reel or 3/8” Primary Reel
Lateral and main lines.
6” – 10”
3/8” Primary Reel
Jetter Hose Selection Chart
Jetter Nozzle Selection Chart
Penetrating Nozzle (Red Cowl): Uses three jet thrusters in reverse plus one jet pointed
forward to penetrate solid grease, sludge or sediment blockages. The forward jet blasts a
small hole in the blockage for the nozzle to follow. It is also very effective when jetting ice
blockages. Attaches to hose with quick connect, includes cowl protection. For 3” to 6”
drain sizes.
Negotiator Nozzle (Blue Cowl): Use this nozzle to help negotiate more difficult bends or
gully traps as it is of a short construction. This nozzle has three reverse jet thrusts and one
forward. Attaches to hose with quick connect, includes cowl protection. For 3” to 6” drain
sizes.
Large Drain Nozzle: hard fixed end within the standard kit for work on smaller diameter
pipes (3” to 4”) with tighter radiuses/bends. This nozzle is smaller in size and eliminates
the quick connect to allow easier negotiation around bends in the line. It has three rear jets
with one facing forward for a range of applications. Nozzle includes a 1/4” BSPT thread to
connect directly to hose thread.
Small Drain Nozzle: supplied with optional equipment flexible leader for smaller diameter
pipes (2” to 4”). This nozzle is exceptionally small and short and has three rear jets with
one facing forward for a range of more domestic applications e.g. internal drains/pipes
etc. Nozzle includes a 1/8” BSPT thread to connect directly to hose thread as supplied
standard.
Reverse Root Cutting Nozzle: Use to clear roots and other type of blockages. Uses a
rear facing oscillating jet for more complete drain cleaning. Attaches to hose with quick
connect. For drain sizes 4” to 10”, as noted here.
WARNING If using the Reverse Root Cutting nozzle for drains larger than 6”/150 mm and up to
10”/250 mm, an extension must be used to reduce the risk of the nozzle changing direction in the
drain, exiting at the user and causing serious injury.
If using nozzles that are not equipped with a quick connect, the female quick connect must be removed from the end of
the hose and the nozzle securely threaded on. Stock hoses and nozzles use BSPT threads. Make sure that the threads
match and that sealant is used to prevent leaks.
