User manual for PC DVR card
10
7.4.1 Auto
AUTO: lens will change between day (color mode) and night (b/w mode) automatically.
Delay time: user can set the delay time for switching from day to night. The time value is 1~15; system
default value is 3;
D/N level: low, middle and high 3 different levels to be chosen. System default level is middle.
7.4.2 Color
If user set the Day/Night status to be color, which means both day and night the image is color. That
can help the user to distinguish the license plate’s color.
7.4.3 B/W(black and white)
If user set the Day/Night status to be B/W, the day or night the image will both be black/white.
Burst:
User can set the burst status ON/OFF. OFF means closing the color signal under B/W mode,
that can make the monochrome image clearer. The system default is ON.
Menu
Lens ESC
White BAL ATW
AGC ON
Day/Night AUTO
Image ADJ
General
Initial OFF
Exit
Change Delay Time
Delay time …..
D/N level High
Menu
Lens ESC
White BAL ATW
AGC ON
Day/Night B/W
Image ADJ
General
Initial OFF
Exit
Color Burst
Burst ON
