Jetview 27X Zoom, User Manual

Page: 18 / 40

17
16. DAY& NIGHTF
The function is used to distinguish an object clearly in
the dark condition.
▶ Auto-Low : This mode is worked automatically
according to sensitivity, if the sensitivity is low
▶ Auto-Hi : This mode is worked automatically
according to sensitivity, if the sensitivity is high.
▶ On : Change into DAY & NIGHTY mode by hand-
worked
▶ Off : Set DAY & NIGHTY mode ‘ off’
17. STABILIZE On/Off
There is some tremble as zoom magnification is high,
the function can compensate the tremble.
▶ On / Off
18. SELECT ALARM
Select alarm detection.
▶
Sensor / Motion
19. MOTION DETECTION
Set Motion ‘On’ after move the camera where user
wants.
It displays the message ‘Motion Detected’ on the
screen when the moving of an object is sensed on
the same screen.