Jetview 27X Zoom, User Manual

Page: 14 / 40

13
1. ID SET.
This function is to set camera ID up to 16 letters on the
monitor. User can choose letters that they want, if user
control a joystick up / down / right / left, and user can
reselect the previous letters, if user presses Z/I, Z/O or
turn the head of the joystick to right/left
2. OSD DISPLAY.
Set up whether user sets ID and STATUS to display
on the screen in normal operating.
•
ID + Status : ‘ID’ and ‘Status’ displayed on the
screen
•
ID only : Only ‘ID’ displayed on the screen
•
Status only : Only ‘Status’ displayed on the screen
•
All off : Nothing displayed on the screen
3. H-V REVERSE
Set up H-V reverse mode.
• Normal
• H-REV : You can flip the picture horizontally on the
screen.
• V-REV : You can flip the picture vertically on the
screen.
• HV-REV : You can flip the picture horizontally and
vertically on the screen.
4. AGC CONTROL
AGC(Automatic Gain Control)- It adjusts the amount of
video amplification to maintain a full 1-volt peak-to-
peak video signal output automatically.
▶
Low, Medium, Max