Jetter JX2-IO16, User Manual

Page: 12 / 124

1 Safety Instructions JetWeb
12 Jetter AG
1.1.3 Who is Permitted to Operate the JX2-IO16
Module?
Only instructed, trained and authorised persons are permitted to operate the
JX2-IO16 module.
1.1.4 Modifications and Alterations to the
Module
For safety reasons, no modifications and changes to the JX2-IO16 module and
its functions are permitted.
Any modifications to the JX2-IO16 module not expressly authorized by the
manufacturer will result in a loss of any liability claims to Jetter AG.
The original parts are specially designed for the JX2-IO16 module. Parts and
equipment of other manufacturers are not tested on our part, and are,
therefore, not released by us.
The installation of such parts may impair the safety and the proper functioning of the
JX2-IO16 module.
Any liability on the part of Jetter AG for any damages resulting from the use of non
original parts and equipment is excluded.
1.1.5 Repairing and maintaining the JX2-IO16
Module
The JX2-IO16 module must not be repaired by the operator itself. The JX2-IO16
module does not contain any parts which can be repaired by the operator.
If the JX2-IO16 module needs repairing, please send it to Jetter AG.
The JX2-IO16 module is maintenance-free. Therefore, absolutely no inspection or
maintenance works are required for the operation of the module.
Transport: Only by personnel with knowledge in handling
electrostatically sensitive components.
Installation: Only by specialists with training in electrical
engineering.
Commissioning: Only by specialists with extensive knowledge of, and
experience with, electrical engineering / drive
technology.