Jetter JVM-407B-HMI, User Manual

Page: 36 / 300

36 Jetter AG
4 Mounting and installation of the JVM-407B
4.1 Interfaces
The connector has the following functions:

Power supply of the JVM-407B

Digital I/Os
The function of the CAN interfaces is as follows:
 Interface CAN 1: Configurable as CAN-PRIM interface
 Interfaces CAN 1 through CAN 3: Configurable as CANopen® bus
interface
 Interfaces CAN 2 through CAN 3: Configurable as SAE J1939 interface
The connector has the following functions:
 Option to connect a video camera, e.g. a rear-view camera, with an
operating voltage of DC 12 V.
The function of the RJ45 jack is as follows:
 Ethernet port to a PC
 Ethernet port to other devices, such as a controller
The USB port serves the following purposes:
 Updating the system via USB flash drive
 Interface for USB flash drives providing additional memory

Interface for USB devices, such as mouse or keyboard
Topic Page
Example - Wiring ........................................................................................... 37
Connecting the power supply ....................................................................... 38
Connecting digital inputs/outputs .................................................................. 41
Ignition - Switch-off delay .............................................................................. 44
Ethernet port ................................................................................................. 45
CAN interface ................................................................................................ 46
CAN bus cable - Specification ...................................................................... 50
Connecting a video signal ............................................................................. 52
Connector for the power
supply and the digital
inputs/outputs
Three CAN interfaces
Connector for video
camera
Ethernet port
USB port
Contents