Jetter JVM-407B-HMI, User Manual

Page: 52 / 300

52 Jetter AG
4 Mounting and installation of the JVM-407B
Connecting a video signal
The illustration below shows the pin assignment of the video camera
connector (as viewed from the cable side):
Pin Description
1 Supply voltage (DC 12 V) e.g. for a camera
2
Video signal (+)
3
Shield
4 Ground (GND)
5
Video signal (-)
6
Ground (GND)
7 Video signal (-)
8
Reserved (do not connect!)
If no differential video signal is used, connect video signal (-) (pin 7) and GND
(pin 6).
DC 12 V DC 12 V
V+ V+
GND GND
V-
Pin assignment - Video
input
Note on Video Signal