Jetter JVM-407B-HMI, User Manual

Page: 41 / 300

Jetter AG 41
JVM-407B Mounting and installation of the JVM-407B
Connecting digital inputs/outputs
This connector is also used for power supply.
The illustration below shows the pin assignment of the connector for inputs
and outputs (as viewed from the cable side):
Pin Description
3
Output 1
4
Input 2
5 Input 4
6
Input 6
7 Input 8
8 Input 10
9
Input 12
10
Input 14
11 GND
13
Output 1
14 Input 1
15 Input 3
16
Input 5
17 Input 7
18
Input 9
19
Input 11
20 Input 13
21
Input 15
Because output 1 can source a current of up to 3 A, output 1 has been
assigned to pins 3 and 13. Connect pin 3 and 13 in order to halve their current
load.
Purpose of the
connector
Pin assignment of inputs
and outputs
Note on output 1