Jetter JetViewMobile 205, User Manual

Page: 21 / 42

Jetter AG Firmware and system menu | 7
User Manual – JetViewMobile 205 21
Multiple menu
languages
To integrate additional menu languages see Language selection in the system
menu [
}
30] .
7.3 Updating the firmware and system menu via USB
The firmware and system menu of the JVM-205 can be updated via USB.
An update cable is required for the update ( Accessories [
}
39] ).
INFO
Do not update while using
The firmware and system menu must not be updated while the
motor is running or the vehicle is being used.
INFO
This procedure requires an operating system that is already
installed.
Update preparation
ü The required firmware package JVM-205-K00-O31 _rev_x_x_x_x.zip has
been provided by Jetter Support (support@jetter.de).
1.
Make certain the control unit is turned off.
2.
Connect the 12-V power supply.
3.
Unpack the firmware package JVM-205-K00-O31 _rev_x_x_x_x.zip .
The sequence x_x_x_x represents the firmware version.
4.
Create the EDC file: Creating an EDC file.
Perform update
1.
Copy file 41434445.EDC to a USB stick.
2.
Insert the USB stick in the USB A socket of the update cable.
3.
Turn on the device.
4.
Open the system settings:
5.
Select the option Update via USB :
ð The firmware and system menu are updated.