Jetter AG
Mechanical installation | 6
User Manual – JM-100x-S1
17 / 35
6 Mechanical installation
This servo amplifier has been designed for being installed in a control cabinet.
Die Schutzart ist IP20. The specified ambient conditions during operation must be
complied with.
The servo amplifier must be fastened to a metal mounting panel in vertical direc-
tion with the power and motor connector X1 pointing downwards. Its rear panel
must have full contact with the mounting panel.
ü
Prior to installing the servo amplifier, check it for transport damages.
ü
The mounting plate in the control cabinet must not be coated.
ü
Make sure that the clearance around the device meets the specification.
1.
Drill the mounting holes.
2.
Screw the fastening bolts into the mounting panel by half of their length.
3.
By means of the keyholes in the rear panel, hang up servo amplifier by the
fastening screws.
4.
Screw the lower screw down tightly.
5.
Screw the upper screw down tightly.