2 New Features
2.1 Festo CPX-CP Interface
The CPX-CP interface is an expansion module for the CPX terminal of the
Festo AG & Co. KG. The CPX-CP interface serves to connect the fitting CPI
modules by Festo (CP valve terminals and CPI-I/O modules).
Introduction
192 digital inputs and 192 digital outputs can be directly connected to a
CPX-FB14
Further, up to 4 analog inputs and outputs can be connected
The individual modules of the CPX and CPI system have been specifically
described in the documentation published by Festo AG & Co. KG. Giving heed
to the safety regulations listed there, as well as only using the modules for
their intended purpose are imperative.
Documentation
published by Festo AG &
Co. KG
The following hardware and operating system versions are required for
applying the CPX-CPI interfaces to Jetter AG controllers:
Required Hardware and
Operating System
Versions
Module
Comment
As of Software
Release
JC-24x Controller
V
3.26
JX6-SB / JX6-SB-I
JX6 submodule
V 2.21
CPX-CP-4-FB
Festo: CPX-CP interface
CPX-FB14
Festo: CANopen field bus node
This chapter contains the following topics:
Contents
Topic Page
Restrictions at Using the CAN System Bus .................................................... 9
Access to the Modules at the CPX-CP Interface .......................................... 10
8
Jetter AG
