Jette JERONIMO, User Manual

Page: 10 / 14

Parts list:
Before setting up, make parts list without missing :
frameX1(fig1); rear axle X1(fig2); rear wheel setsX2(fig3)
;
f
ront wheel sets X2(fig4)
;
Seat sets X1 (fig5)
;
front bumper barX1(fig6);
canopy(fig
7
);
Set Up
1. Open the folding latch and lift up the handle to open the stroller(fig1), until you
can hear a latching sound (fig8)
.
2.
P
ut the rear axle onto the frame(fig 9), you can check whether the axle has
locked by pulling it. Press the button and pushdown the axle to take it off(fig10)
.
3. Press the middle button of the rear wheel and push the rear wheel onto the axle
until you can hear a latching sound (fig11) ;Press the middle button of the rear
wheel and pull to outside can take off the rear wheel (fig11)
4.press the button and put the front wheel onto the axle until you can hear a
latching sound (fig12) ; press the button and put the front wheel down to take off
the front wheel (fig12)
.
5.Put the seat onto both openings of the frame until you can hear a latching sound
(fig14).
You can check whether the seat fixed by pulling it upwards slightly. The
seat can be fastened in both directions. For detaching the seat, press both buttons
and lift the seat from the frame
(
f
ig15).
Front bumper bar
To attach the bow, put it in the two provided notches for the bow on he seat
(fig17);
to demount the bow, press the locking mechanism on the inner side of the
bow retainer and pull the bow out(fig.18)
Assembly the canopy:
Insert the two plastic clips into the plastic slots in both side(fig19). Check the
canopy fixed or not by pulling it upwards; For dismantle the canopy, press both side
button towards inside and then pulling the canopy upwards (fig20); Fix the zipper
to connect the canopy and seat cover(fig21)
ATTENTION: Always fold the canopy before you fold up the stroller
Swivel wheel function:
Put the button for front wheel down to activate the swivel wheel, and put the
button up to lock the front wheel
（
fig 13
）
10