Setting up:
Before you can set up the buggy, you must open the safety lock (fig.
1). Now pull the sliding handles all the way up, so that the pram is
fully upright (fig. 1a). Then, press the lock all the way down (fig. 1c),
until it quietly snaps into place. Check if all the parts are stable before
seating your child in the buggy.
Attaching the wheels:
In order to attach the front wheels, press them on to the wheel
mounts on the frame, until you can hear them click in place (fig.
2a).In order to detach the front wheels, press the two tabs (fig. 2b)
and pull the wheel from the mount.
Swivel wheel function:
Press the two plastic clips up in order to activate the swivel wheel
function for the two front wheels (fig. 3a). In order to fix the front
wheels, press the two plastic clips down (fig. 3b).
Applying the break:
In order to apply the break, press both break levers down (fig. 4a). In
order to release the break, press both break leavers upwards (fig. 4b).
WARNING:
Please only apply the break using the purpose built break
lever on the right hand side of the wheel.
Adjusting the foot rest:
By pressing the two levers on the bottom right and left, the foot sup-
port can be positioned as required (fig. 5).
Safety belt:
In order to put on the safety belt, attach both belt clasps (A + B) on
the middle belt (C). In order to open the safety belt, press the side
clips at the same time and pull the belt clasps apart (fig. 6).
7
9
12
GB
Summary of Contents for Jack
Page 1: ......
Page 3: ...1a 1b 1c 2a 2b 3a 3b...
Page 4: ...4a 4b 5 6 7a 7b...
Page 5: ...8a 8b 9a 9b 9c...
