Jetson V8 Sport, Manual

Page: 8 / 24

8
HOW TO CONNECT TO BLUETOOTH®
Your Jetson V8 Sport is equipped with two Bluetooth modules: one for the App, and one for your
Bluetooth speaker. You will need to connect to them separately.
To connect to your Bluetooth speaker:
1. Turn on the Jetson V8 Sport and it will become discoverable on your handheld device.
2. To connect, activate your Bluetooth in your handheld device’s settings.
3. Find the V8 Sport in your handheld device list, and select to connect to play your music.
To connect to the Ride Jetson app:
1. Open the Ride Jetson app on your handheld device.
2. Tap the Bluetooth symbol in the top left corner of the app to find your V8 Sport.
3. Select your hoverboard. Default password is “000000.” (note: To customize your password go to
Settings in the App. To factory reset the password please recalibrate the device)
4. You should now be connected and able to use the Ride Jetson app with your V8 Sport.
NOTE: When your app is not connected via Bluetooth, the Bluetooth logo in the app will be white.
When your app is connected via Bluetooth, the Bluetooth logo in the app will turn green.
MODE SETTINGS
In the Ride Jetson App you can choose from three settings: Beginner, Intermediate, and Advanced.
• Maximum speed in Beginner operating mode: Up to 4 mph**
• Maximum speed in Intermediate operating mode: Up to 8 mph**
• Maximum speed in Advanced operating mode: Up to 10 mph**
**A lot of factors can affect speed and drive distance, such as the weight of the driver,
weather conditions, terrain, and overall maintenance of the Jetson V8 Sport.
NOTE: Rider can also manually customize settings outside of preset settings. Other features that
can be adjusted in the Ride Jetson App include Steering Sensitivity, Driving Force, Maximum
Speed, and Auto Shutdown Time.
HOW TO RECALIBRATE
When the Jetson V8 Sport experiences an error, the running indicator light will turn red. That
means it will not operate until it is properly recalibrated. Please do not try getting on the unit until
the error has been fixed. To recalibrate, follow these steps:
1. Put the hoverboard on a flat, level surface, with the pads facing up.
2. Press and hold the Power Button for about 5 seconds until the lights on the Jetson V8 Sport flash,
and you are notified of a successful calibration.
3. Turn it OFF and then ON again to restart the Jetson V8 Sport. That completes the recalibration,
and is now ready for use.