Jetson V8 Sport, Manual

Page: 6 / 24

6
JETSON V8 SPORT OVERVIEW
PAD SENSORS
There are four sensors under the pads. Never remove the pad, or you will revoke the warranty.
When the Jetson V8 Sport is turned on and you step on, it will automatically adjust to the balance
mode. Don’t step outside the outline on the pads. Do not put items on the pads; that will prevent
the Jetson V8 Sport from switching off, which could cause a collision. The device will not move
without putting pressure on at least one sensor.
INDICATOR LIGHTS
1. Warning Indicator Light (Red) If red warning light is flashing, there is an issue with the hover -
board (low battery, over speed, power issue, etc.)
2. Balance Indicator Light (Green) The hoverboard is in Balance Mode when in use.
3. Battery Status Indicator Light (Green) When power is on, the battery status indicator light will be
solid green.
4. Battery Level Indicator Lights (Green)
• Three green Battery Level indicator lights, about 71-100% Power
• Two green Battery Level indicator lights, about 41-70% Power
• One green Battery Level indicator light, about 11-40% Power
• No Battery Level indicator lights, about 10% or less Power
Warning If battery power goes below 10%, the device will automatically turn off for your safety.