Jetson Haze, Manual

Page: 57 / 62

55
Care & Maintenance
CLEANING YOUR HAZE
Do not spray or apply water directly onto to the scooter. Water can cause damage to the wiring, battery compartment, and lights,
as well as deterioration of the frame—all of which could cause a malfunction that puts rider safety at risk. Here’s how to clean
your e-bike:
• Seat & frame - Wipe with a damp dust-free cloth or one dipped in rubbing alcohol. Follow with a dry dust-free cloth.
• Handlebar - Wipe down with mild soap using a damp dust-free cloth. Remove excess soap with a separate damp cloth.
• Wheel components - Wipe with a damp dust-free cloth.
• Tires - Wipe with a damp dust-free cloth. A tire finisher or cleaner can also be used.
HANDLING YOUR HAZE
• Avoid exposing your Haze to severe vibration or intense physical impact.
• Never disassemble the battery.
• Keep your Haze away from water and moisture.
• Ride on smooth, flat surfaces to avoid breakage.
• Never carry your Haze by the wheels, seat, or handlebar.
• Take care not to pull or snag the wiring connecting the motor with the handlebar components.
SECURING YOUR HAZE
The Haze is equipped with a rear wheel lock that is compatible with the same key as the battery that came with the bike.
• To lock, open lock cap, using the key push lock through rear wheel disc, then close lock cap.
CAUTION: The wheel will lock up if the wheel lock is on and the speed is engaged. (Refer to section 1.10 of this manual.)
MAKING CHAIN ADJUSTMENTS
• The chain must be at the correct tightness.
When the chain (C) is at the correct tightness, you can rotate the
crank freely and you can pull it no more than one-half inch (A) away
from a straightedge (B) as shown.
• If too tight, the bicycle will be difficult to pedal.
• If too loose, the chain can come off the sprockets.
Adjust the tightness of the chain as follows:
• Loosen the axel nuts on the rear wheel.
• Move the rear wheel forward or backward as necessary.
NOTE: Make sure the rear wheel is centered under the bicycle frame.
• Hold the wheel in this position and tighten the axel nuts.
C
B
A
WARNING
:
Do not attempt to repair a broken chain. If your chain
breaks, bring your bicycle to a bicycle service shop.