38
CHARGING AN UNINSTALLED BATTERY:
1. CONNECT THE CHARGING CABLE WITH THE CHARGER.
2. PULL OPEN THE CHARGING PORT COVER ON THE BATTERY.
3. PLUG THE CHARGING CABLE INTO THE WALL, AND THEN PLUG THE CHARGER INTO THE CHARGING PORT.
4. WHEN THE INDICATOR LIGHT ON THE CHARGER TURNS FROM RED TO GREEN, YOUR BATTERY HAS REACHED FULL
CHARGE. REMOVE THE CHARGER FROM THE CHARGING PORT AND UNPLUG THE CABLE FROM THE WALL OUTLET.
5. CLOSE THE CHARGING PORT COVER.
IMPORTANT CHARGING NOTES:
·
ONLY USE THE INCLUDED CHARGER.
·
ALWAYS KEEP THE CHARGING PORT CLOSED WHEN NOT ACTIVELY CHARGING THE BATTERY.
·
NEVER TURN ON THE BATTERY OR BIKE POWER WHILE THE BATTERY IS CHARGING.
·
FOR BEST BATTERY HEALTH, CHARGE THE BATTERY FULLY DURING EACH CHARGING SESSION—UP TO 5 HOURS.
·
NEVER LEAVE THE BATTERY CHARGING OVERNIGHT OR FOR EXTENDED PERIODS OF TIME.
·
DO NOT ATTEMPT TO DISASSEMBLE THE BATTERY.
- CHARGING
- CHARGING COMPLETE
CHARGING INDICATOR LIGHT ON THE CHARGER:
CHARGING
INDICATOR LIGHT
CHARGING PORT WITH COVER
Summary of Contents for Haze
