background image

5

California Proposition 65

           

WARNING

:

  

This product can expose you to chemicals including Cadmium, which is known to the State of California to cause 

cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.

• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive 

application of the brake may result in injury or death.

• If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team.

• Replace worn or broken parts immediately.

• Check whether all safety labels are in place and understood before riding.

• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate all 

components of the unit before use.

• Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or 

turn abruptly. 

• Recommended for indoor use.

• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.

MODIFICATIONS

Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care 

Team. This will void any warranty, and can lead to malfunctions which may cause injury.

ADDITIONAL OPERATION PRECAUTIONS

Do not lift the product off the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, which may cause 

injury to yourself or others nearby. Do not jump on or off the product, and do not jump while using it. Always keep your feet firmly planted 

on the foot rest while in operation. Always check the battery charge before using.

DISPOSAL OF USED BATTERY

Battery may contain hazardous substances which could endanger the environment and human health. This symbol marked on

the battery and/ or packaging indicates that used battery shall not be treated as municipal waste. Batteries should be disposed of

at an appropriate collection point for recycling. By ensuring the used batteries are disposed of correctly, you will help preventing 

potential negative consequences for the environment and human health. The recycling of materials will help to conserve natural resources. 

For more information about recycling of used batteries, please contact your local municipality waste disposal service.

GENERAL LIMITED WARRANTY

Your new Jetson product is warranted against defects in materials and workmanship as indicated on ridejetson.com/warranty 
for a period of time from the date of original retail purchase when used in accordance with Jetson's user manuals 
(refer to ridejetson.com/support). Under this warranty, you will be able to direct your claims to Jetson even in situations 
where you purchased the Jetson Product from one of our authorized retailers.
 To read the full terms of our warranty, 
visit ridejetson.com/warranty.

Warranty Coverage

Summary of Contents for Copperhead JCOPHD-BLK

















































Reviews: