VFD Valve, Piston Complete
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. 054100973
Doc. Rev.: 8 (2022-03-04)
5
Installation
1
Push the valve onto the pipe sleeve/
stud connection.
2
Connect the flushing device to
the valve and secure with a hose
clip.
3
Connect the release mechanism.
4
Connect the water supply. Do not
over tighten.
Use a Jets™ Filter (product
number 034512300) or similar.
Service and Maintenance
In tight locations, note that it is possible to slide the controller off first to allow more space for removal of the valve.
Service and Maintenance - Disassembly Instructions
1
Turn off the water supply to the valve. Release any liquid in the water
source (i.e. toilet, urinal etc.).
2
Pull the release mechanism hose
from the controller.
3
Remove the hose clip and pull to
remove the flushing device.
4
If a transport spring is installed,
release the spring (connecting
the lower housing of the valve to
the bowl) and remove it.
5
Pull the VFD Valve, Piston Complete
to release it.
6
Remove the Hose (175mm)
℮
between the D Valve, Piston and
the Distributor w/NR Valve.
7
Remove the remaining Hose
(155mm)
℮
between the D Valve,
Piston and the Distributor w/NR
Valve.
8
Pull the VPC-V Controller
backwards to release it from the
D Valve, Piston
ℯ
.
