3
INSTALLATION MANUAL (Issue n°00 - 20/05/2022)
Ref.
JP MJ 008 - YAMAHA XTZ690 TÉNÉRÉ 700
Assembly Instructions
Unplug the cable from the Intake Air Temperature sensor, placed on the right side under the
display support, and plug it to the JP ECU using the IAT connection cable, than connect the
other side of the bridge cable to IAT once again.
Once connected, you can set the value using the manual knob.
By setting the module to “0” (completely turned to the left) you will have the normal stan-
dard bike setting without any change on the carburation.
We raccomend to start with a value of “5” on lightly modified motorbikes.
END