9
Preparing Jetpik for Use
Before using:
① P
lace one floss capsule into the nozzle (Note that Jetpik will not work properly without the floss capsule in position and you don’t
need to replace it but must have one in the nozzle). Fig 1
② Clip the nozzle into the handle and latched firmly. Fig 1
③ Insert the quick connector on one side of the water supply tube to the Jetpik handle water inlet.
④Use the spool of the water supply tube to clip the other end of the tube into a cup or bottle of water or you can use the lid as your
cup. Note –To ensure that the tube remains fully immersed beneath the surface of the water.
(see below Figure 2)
Fig1
Push
Fig2
Summary of Contents for JP-51M
Page 1: ...Jetpik Model JP 51M 51 210 250 SOLO Power Floss System...
Page 8: ...6...
