Jetmaster UNIVERSAL, Installation & Operation Instructions, Page: 2 / 13

1
ASSEMBLY AND INSTRUCTION
• Position unit on finished hearth level - ensure air intake at base of unit is not
obstructed;
• Bolt gather to unit;
• Insulate entire unit and gather where painted red;
• Bolt Lintel (optional) to unit - insulate between unit and Lintel;
• Rivet inner flue to collar of gather at three places;
• Rivet all further inner flues at three places;
• If using double skin flues space inner and outer flues using 3 x 25mm self tapping
screws through outer casing at bottom, at each join and at top. Also ensure that
flues are ventilated at top and bottom, and when using a cover cone drill a series
of holes into the outer flue below the cover cone to ensure adequate ventilation;
• Fit cowl to flue or chimney breast.
RECOMMENDATIONS
• Do not recess unit by more than 110mm
• Use a minimum of 3.6 metres lengths of flue
JETMASTER UNIVERSAL - General Installation Instructions
JETMASTER UNIVERSAL
DIMENSIONS IN MILLIMETRES
Heating capacity
Cu. Meters
MODEL A A1 B* C D E Wood
440 470 510 330 610 200 200 75
500 570 600 350 650 200 200 85
600 670 700 350 650 200 200 100
600 LOW 670 700 350 600 200 200 100
700 SH 770 800 350 650 200 200 130
700 SH LOW 770 800 350 600 200 200 130
700D 770 800 400 700 225 200 160*
850 920 950 450 750 250 220 180
850 LOW 920 950 450 700 250 220 180
1050 1120 1150 500 800 300 240 220
1200 1250 1300 605 1020 250** 400 300
1500 1550 1600 605 1020 300** 400 350
*Tested to 15Kw at maximum burning.
** Requires 2 flue outlets (single flue option also available)
JETMASTER DOUBLE-SIDED
DIMENSIONS IN MILLIMETRES
Heating capacity
Cu. Meters
MODEL A B C D E F Wood
700 800 800 610 700 220 345 200
1050 1205 1150 600 770 233 415 300
JETMASTER FREESTANDING
DIMENSIONS IN MILLIMETRES
Heating capacity
Cu. Meters
MODEL A B C D Wood
600 1000 390 810 200 160
700 SH 1050 390 810 200 180
700D 1100 440 911 225 200
850 1200 490 983 250 240
CONTENTS
JETMASTER UNIVERSAL - General Installation Instructions ................................. 1
Summary of Minimum Jetmaster Installation Specs ..........................................2 - 3
Jetmaster Installation into an Existing Fireplace ..................................................... 4
OPEN WOOD JETMASTER - Minimum Flue Height ............................................... 5
Construction Specifications - Jetmaster Traditional Victorian ................................. 6
Construction Specifications - Jetmaster Brick Veneer Installation ......................... 7
Construction Specifications - Jetmaster Installation Using Hebel .......................... 8
Construction Specifications - Jetmaster Traditional Space Saver .......................... 9
Construction Specifications - Jetmaster Traditional Edwardian On Stud Wall ..... 10
Construction Specifications - Jetmaster Free Standing Metal Casing “A” ............ 11
Construction Specifications - Jetmaster Free Standing Metal Casing “B” ........... 12
Construction Specifications - Jetmaster Double Sided “A” ................................... 13
Open Gas Jetmaster .......................................................................................14 -15
OPEN GAS FIREPLACE - Minimum Flue Height ................................................... 16
Open Gas Jetmaster .......................................................................................17 - 18
Operating and Maintenance Instructions - For wood burning Jetmaster ......19 - 20
How to Fit Fascias.................................................................................................. 21