SLOW COMBUSTION FIREPLACE INSTALLATION AND OPERATION INSTRUCTIONS
OPERATING THE UNIT
NOTE: The stove may emit an irritating gas when used for the first time, and it may smell a
little. The gas is not toxic, but it is recommended to open a window or a door to provide
additional ventilation in the room. Let the fire burn with a high draught until all traces of gas
have disappeared and no smoke or smells can be detected.
Door operation
To open the door, rotate the handle through 90° ant-clockwise, and swing open.
To close the door, first rotate the handle to a horizontal position, then swing the door closed, until it
stops against the body of the unit. Gently yet firmly rotate the handle clockwise through 90° to latch
the door.
An additional door setting is provided, allowing the door to be latched at a slightly open position.
From the closed position, rotate the handle anticlockwise approximately 45°. Gently pull back, until
the door catch, touches the catch rest on the body. Let the handle swing back clockwise, until it rests
in place.
This door setting can be used on fire start-up, to provide additional air to the fire thereby allowing the
fire to be established, and the unit to heat up faster.
NOTE: The handle on this unit might reach uncomfortable temperatures during continuous
use. Always first test the handle temperature before gripping it. When in doubt, always use a
glove or oven mitts.
15
