Jetline CWF-50, Operation Manual

Page: 25 / 35

CWF-50 Cold Wire Feeder
- 19 -
Section VII
Optional Accessories
When you purchased your cold wire feeder,
you may not have been aware of optional en-
hancements for your unit. Jetline is pleased to
offer these enhancements which can be added
to your system in the field.
If you are interested in these features, please
do not hesitate to contact Jetline directly or the
nearest distributor for more information.
A. 607B Spool Cover
The 607B is a clear plastic cover designed and
manufactured for Jetline’s wire feeders. The
cover mounts around the spool holder and en-
cases the standard “30 lb/12 inch” wire spool
which fits onto the spool mounting adaptor. The
main purpose of the cover is to protect the wire
from dust and weld particle build-up. The clear
plastic allows the operator to see the spool ef-
fectively. Installing the spool cover is a simple,
perhaps 5 minute, job.
B. WGP-2ES Motorized Wire
Guide Positioner
The standard wire feed unit is provided with a
manually adjusted WGP-1 wire guide positioner.
In some applications, the operator cannot eas-
ily get to the positioner to make the desired al-
terations to the wire’s location as it enters the
weld puddle. Due to the cast and helix in some
wires, the need to adjust the wire’s position can
be required.
Jetline offers the WGP-2ES motorized positioner
so the operator can adjust the position of the
wire from a remote location. The positioner in-
cludes the motorized wire positioner, the mo-
tor control, and a joystick pendant which the
operator uses to move the wire guide tip to the
desired position. Speed of motion is adjustable
to provide accurate positioning as desired by
the operator.
C. WGP-3 Compact Wire Guide
Positioner
In some applications, the space envelope re-
quired by the standard WGP-1 is too large.
Jetline manufactures a wire guide positioner
which requires less space, yet still gives the
operator the ability to adjust the wire position.
The WGP-3 is designed to attach directly to
the torch, but includes a curved wire guide tip.
Wire is fed vertically until the moment where it
is angled into the weld puddle.
D. CHWS-100 Wire Straightener
In some applications, minor deviations in wire
position are a result of the cast in the wire. The
wire straightener can help limit the twist by us-
ing a 3 roll action. Tension on the center roll
is adjustable. The unit mounts on the inlet side
of the drive roll assembly. The straightener is
designed to work on 0.035” and 0.045” (0.9/1.0
and 1.2 mm) wire.