computer radio control system
Every receiver is able to transmit the actual voltage supplied to the
on-board system (i. e. receiver voltage) without the need to connect
any additional external sensors. If you want to take advantage of
extended telemetry, connect a telemetry sensor to the Ext. input of
the receiver. If you want to operate several telemetry sensors
simultaneously with one receiver, you must use one or more of the
Expander EX
devices, which , when connected to the
Ext. receiver
input, gives you multiple inputs for telemetry sensors.
There are two ways to use JETI telemetry. The
EX telemetry
is
available to owners of the
JETI DC/DS transmitters
or the
JETIBOX profi.
The
1st Generation Telemetry
can be used by
owners of the
TU, TG, TF
etc. transmitter modules.
4.1 EX Telemetry
This telemetry data is displayed according to user selections in the
DC/DS transmitters and the JETIBOX profi. You will find more
details in actual instruction manuals of the given
Duplex EX
equipment.
4.2 - 1st Generation
Connect the JETIBOX to the transmitter module. Switch on the
transmitter and connect the receiver voltage supply
(see chapter
„Voltage supply“)
. The Tx heading appears in the JETIBOX display
and by pressing the push-button R (right button) twice, select the
Mx menu. By pressing the push-button D (down) you will enter the
telemetry sensor or expander menu. You may leave the telemetry
sensor menu by pressing the push-button U(up) slightly longer.
4 Real
t
ime
t
elemetry
EN
8
®
User Manual
User Manual
EN
FW 1.00
Receivers REX
FW 1.00
COMPLEX RADIO CONTROL SYSTEM